Optimization of cation detection by capillary zone electrophoresis with indirect UV absorbance

Summary The indirect UV detection of cations by capillary zone electrophoresis gives peaks of very different height or area between cations. We show that the height depends on the electrophoretic mobility of the cation compared with the electrophoretic mobility of the chromophore used. Moreover, the limit of detection can be easily improved by about 4-fold by adjusting the concentration of complexing agent or by using a chromophore with the same velocity as the studied cation. Using a new parameter termedsensitization power we can optimize the limit of detection and have determined the best chromophores for each family of cations.Sensitization power is a maximum for: alkali metals and alkali earths with imidazole and UV Cat 2^?, for transition metal with pyridine, for light rare earth with ephedrine and UV Cat 1^?, for heavy lanthanides with 1-naphthylamine and phenyl-trimethyl-ammonium bromide. Corrected areas of all cations studied have normal distributions directly proportional to their ionic charge. Certain behaviour can be predicted for elements such as actinides. Detection can also be enhanced because the relation of proportionality between ionic charge and corrected area allows comparison of the performance of all chromophores.     

IDENTIFICATION OF PARTIAL MUTATIONAL SITES IN HUMAN MITOCHONDRIAL DNA IN THE CHINESE AND ITS SIGNIFICANCE

A simple method for the identification of mutational sites in human mitochondrial DNA (mtDNA) was described. It was based on the human Cambridge sequence as a relative standard sequence and a single base pair substitution in mtDNA as a unique mutational form. The partial mutational sites can be determined using this method which was characterized by combining the restriction mapping with the analysis for the table of human mtDNA potential mutational sites with rapidity and simplicity. In the meanwhile, six mtDNA mutational sites found in Chinese population were identified by means of this method.     

Evaluation of new selective molecularly imprinted polymers prepared by precipitation polymerisation for the extraction of phenylurea herbicides

Three different molecularly imprinted polymers (MIPs) have been prepared by precipitation polymerisation using linuron (LIN) or isoproturon (IPN) (phenylurea herbicides) as templates and methacrylic acid (MAA) or trifluormethacrylic acid (TFMAA) as functional monomers. The ability of the different polymers to selectively rebind not only the template but also other phenylurea herbicides has been evaluated. In parallel, the influence of the different templates and functional monomers used during polymers synthesis on the performance of the obtained MIPs was also studied through different rebinding experiments. The experimental binding isotherms were fitted to the Langmuir-Freundlich isotherm allowing to describe the kind of binding sites present in the imprinted polymers under study. It was concluded that TFMAA-based polymer using IPN as template presents the best properties to be used as a selective sorbent for the extraction of phenylurea herbicides.     

A new method for characterizing solid surface acidity - an infrared spectroscopic method using probe molecules such as N2 and rare gases

A new infrared-spectroscopic method to characterize acid sites of zeolites using small and weakly basic molecules such as diatomic and monoatomic molecules is reviewed. It has been revealed that N2 is an effective probe molecule to characterize both Brønsted acidity and Lewis acidity of H-form zeolites. The characteristics of the N 2 probe are discussed in detail in comparison with the CO probe. O2 and rare gases have also been applied to monitor the strong acid sites in the H-form zeolites. Further, the studies of the adsorption of water on H-form zeolites are shortly reviewed: a recent IR study of the H₂ ¹⁸O adsorption on H-ZSM-5 has given direct experimental evidence that the main feature of the observed IR bands is due to the hydrogen-bonded adsorption of water on the Brønsted acid sites.     

ImmobilizedE. coli Alkaline Phosphatase

We have immobilized E.coli alkaline phosphatase (EC 3.1.3.1) by linking it covalently to sepharose 4B. This preparation has several advantages over the soluble enzyme. The immobilized enzyme is easily separable from other constituents in incubation mixtures. The immobilized enzyme can be reused repeatedly and is more stable than the soluble enzyme to heat treatment in the presence of 10 mM Mg²⁺. The insoluble and soluble phosphatases removed 75 and77%, respectively, of the inorganic phosphorus from casein. The immobilized enzyme inactivated two enzymes believed to be active in the phosphorylated state, acyl-CoA : cholesterol acyltransferase (ACAT) by 39% and NADPH-cytochrome P-450 reductase by 89%. The utility of immobilized alkaline phosphatase for studying the phosphorylation and dephosphorylation of soluble or membrane-bound enzymes and proteins is discussed.     

Arsenidostannate mit Arsen-analogen [SnAs]-Schichten: Darstellung und Struktur von Na[Sn2As2], Na0,3Ca0,7[Sn2As2], Na0,6Sr0,6[Sn2As2], Na0,6Ba0,4[Sn2As2] und K0,3Sr0,7[Sn2As2]

Arsenidostannates with [SnAs] Nets Isostructural to Grey Arsenic: Synthesis and Crystal Structure of Na[Sn₂As₂], Na_0.3Ca_0.7[Sn₂As₂], Na_0.4Sr_0.6[Sn₂As₂], Na_0.6Ba_0.4[Sn₂As₂], and K_0.3Sr_0.7[Sn₂As₂] The metallic lustrous compounds Na[Sn₂As₂], Na_0.3Ca_0.7[Sn₂As₂], Na_0.4Sr_0.6[Sn₂As₂], Na_0.6Ba_0.4[Sn₂As₂] and K_0.3Sr_0.7[Sn₂As₂] were prepared from melts of mixtures of the elements. The compounds crystallize in the trigonal system (space group R3 m, No. 166, Z = 3) with lattice constants see in “Inhaltsübersicht”. The structures are isotypic to Sr[Sn₂As₂] containing puckered [SnAs] nets which are stacked with a sequence of six layers. The E(I)/E(II) atoms are located between each second [SnAs] layer in trigonal antiprismatic interstices formed by As atoms. In the resulting [Sn₂As₂] double layers the _∞²[SnAs] nets are stacked in such a way that additional Sn—Sn contacts arise.     

Investigation of the interaction between acridine orange and bovine serum albumin

The results from the measurement of the fluorescence spectrum showing the binding characteristics of acridine orange (AO) and bovine serum albumin (BSA) are reported. It was found that the equilibrium constant k=4848.64 l mol⁻¹, and the number of binding sites n=0.82. Based on the mechanism of the Forster energy transference, the transfer efficiency of energy and distance between the acceptor AO and BSA were found. The interaction between AO and BSA have been verified as consistent with the static quenching procedure and the quenching mechanism is related to the energy transfer.     

Preparation of Diphenyl Oxalate from Transesterification of Dimethyl Oxalate with Phenol over TS—1 Catalyst

Diphenyl oxalate was synthesized from transesterification of dimethyl oxalate with phenol over TS-1(2.5 wt% Ti)catalyst.TS-1 catalyst,as a beterogeneous catalyst,showed excellent selectivity of diphenyl oxalate and methylphenyl oxalate compared with other homogeneous catalysts.Lewis acid sites on TS-1 catalyst were the active sites for transesterification of dimethyl oxalate with phenol.the high selectivity was closely related to the weak acid sites over TS-1.     

2,6-二甲基吡啶在Y型分子筛的Bronsted和Lewis酸中心上的吸附动力学

２，６—二甲基吡啶在Ｙ型分子筛的Ｂｒｏｎｓｔｅｄ和Ｌｅｗｉｓ酸中心上的吸附动力学董玉林，杨孔章（山东大学胶体与界面化学研究所，济南２５０１００）关键词Ｙ型分子筛，酸中心，Ｌｅｗｉｓ酸中心，２，６—二甲基吡啶，吸附动力学沸石分子筛是一类固体酸催化剂，在...     

Specific Sorption Sites for Nitrogen in Zeolites NaLSX and LiLSX

Specific sorption sites for nitrogen, N₂, in NaLSX and LiLSX zeolites were investigated using a DRIFT spectroscopic method. Sorption of molecular hydrogen, H₂, by NaLSX or LiLSX zeolite at 77 K with DRIFT control of perturbation of sorbed molecules allowed to discriminate two or three different types of specific sorption sites in the respective zeolites. Their H–H stretching frequencies are 4077 and 4081 cm^–1 for NaLSX, and 4061, 4084 and 4129 cm^–1 for LiLSX. With reference to an independent investigation by methods of both sorption thermodynamics and molecular modeling for N₂ sorption on LiLSX, the first two of the corresponding bands were ascribed to H₂ sorption on lithium cations, Li⁺, localized in supercages of the faujasite, FAU, zeolite framework at sites SIII and SIII, while the latter band most likely belongs to H₂ sorption on Li⁺ cations at sites SII, and on hydroxyl groups, OH. Sorption of N₂ by Li⁺ cations at sites SIII and SIII is the strongest, resulting in a decrease of intensity of the corresponding DRIFT bands that stem from subsequent H₂ sorption. Nitrogen sorption by Li⁺ cations at sites SII is much weaker. Sorption of N₂ on Na⁺ cations at sites SIII in NaLSX zeolite is also stronger than by Na⁺ cations at sites SII.